Browsing by Author "Chengula, Duwa"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Variation of Packing Densities and Liquid Film Thicknesses in Alkali Solution and Water in Natural Pozzolan Calcium Hydroxide Pastes and Mortars
    (MJRD F, 2024-12-05) Malisa, Asson; Chengula, Duwa
    The characteristic properties of concrete depend on the quality of mortar. In order to improve the properties of hardened concrete, the mortar needs to have good performance. The property of mortar is affected by wet packing density, liquid film thickness, type and quality of binder, gradation of fine aggregates, and binder-to-fine-aggregate ratio. The commonly used alkali solutions to produce polymer mortar and concrete are cursed by carbon dioxide emissions. This study used alkali solution and water to investigate the variation of packing densities and film thicknesses on paste and mortar mixes. of natural pozzolan and calcium hydroxide at a ratio of 75P25CH and standard sand. The standard proctor compaction tools and procedures were adopted to attain the maximum values of packing density of 0.937 for mortar mixed with alkali solution, 0.919 for mortar mixed with water, 0.906 for paste mixed with alkali solution, and 0.829 for paste mixed with water. For the case of film thicknesses, the optimum values obtained were 0.548 μm for mortar mixed with alkali solution, 0.248 μm for mortar mixed with water, 0.398 μm for paste mixed with alkali solution, and 0.09 μm mixed with water. The results indicate that alkali solution produced higher packing density and liquid film thickness than water for both paste and mortar, and the packing density and liquid film thickness increase with the increase of the number of compacting blows with 9 blows to 36 blows. The study recommends the establishment of standard compaction effort and procedure.
  • Thumbnail Image
    Item
    Variation of Packing Densities and Liquid Film Thicknesses in Alkali Solution and Water in Natural Pozzolan Calcium Hydroxide Pastes and Mortars.
    (MJRD, 2024-12-05) Malisa, Asson; Chengula, Duwa
    The characteristic properties of concrete depend on the quality of mortar. In order to improve the properties of hardened concrete, the mortar needs to have good performance. The property of mortar is affected by wet packing density, liquid film thickness, type and quality of binder, gradation of fine aggregates, and binder-to-fine-aggregate ratio. The commonly used alkali solutions to produce polymer mortar and concrete are cursed by carbon dioxide emissions. This study used alkali solution and water to investigate the variation of packing densities and film thicknesses on paste and mortar mixes. of natural pozzolan and calcium hydroxide at a ratio of 75P25CH and standard sand. The standard proctor compaction tools and procedures were adopted to attain the maximum values of packing density of 0.937 for mortar mixed with alkali solution, 0.919 for mortar mixed with water, 0.906 for paste mixed with alkali solution, and 0.829 for paste mixed with water. For the case of film thicknesses, the optimum values obtained were 0.548 μm for mortar mixed with alkali solution, 0.248 μm for mortar mixed with water, 0.398 μm for paste mixed with alkali solution, and 0.09 μm mixed with water. The results indicate that alkali solution produced higher packing density and liquid film thickness than water for both paste and mortar, and the packing density and liquid film thickness increase with the increase of the number of compacting blows with 9 blows to 36 blows. The study recommends the establishment of standard compaction effort and procedure.